无锡易商科技有限公司[嵘攞嶹攟] 开启企业建站营销新时代、云建站平台倡导者 在线留言  帮助中心  关于我们
热线:0510-8585.1922
您现在的位置:首页 > 站长学院 > 互联网创业 > 经验

厂家如何针对环氧地坪进行日常养护

作者:admin 日期:2018-10-24 12:38:37 人气:60

  

1、边生产边施工情况下,环氧地坪施工环境要有足够隔离区,以免灰、砂粒等渗入未干透的漆膜环氧地坪。2、容易受到污染的区域,比较显眼的门面部位,走廊每天应用拖把清洁1-2次。3、地面如有粗硬砂粒、泥浆等杂物应及时扫除干净,以免砂粒碾磨地面,减少地面磨损。

1. Under the condition of production and construction, the construction environment of epoxy floor should have enough isolation area to prevent ash and sand from seeping into wet epoxy floor. 2. Easy to be polluted areas, more conspicuous facial areas, corridor mop cleaning 1-2 times a day. 3. If the ground has coarse and hard sand grains, mud and other impurities should be timely swept clean, so as to avoid grinding the ground, reduce ground wear. 4、员工进入洁净区之前应换软底鞋;在容易带进砂粒、泥浆的交接处、出入口设置塑料毯,方便员工出入时清除鞋底杂物。

4. Employees should change soft-soled shoes before entering the clean area. Plastic blankets should be installed at the junction where sand and mud can be easily brought into and out of the clean area to facilitate the removal of footwear debris.

5、叉车、铲车卸货时注意货物平放,避免货物侧侄、拖、拽刮伤地面。

5. Forklift trucks and forklifts should be placed flat when unloading, so as to avoid the side of nephew, drag, drag and scratch the ground.

6、车辆、叉车、铲车运行时尽量避免刹车。

6, vehicles, forklifts and forklifts avoid braking as far as possible.

7、经常渗油漏油的部位,用锯末经常清洁,以免油份变性、吸附灰层,成为顽固性污渍。大面积油浸的区域,可用宽布拖把,推动锯末吸干环氧地坪油份。

7. Frequent oil leakage parts, often clean with sawdust, in order to avoid oil denaturation, adsorption ash layer, become stubborn stains. Large area of oil immersion, wide cloth mop can be used to drive sawdust to drain the floor oil.

8、机修工具尽量避免砸落地面。

8, repair tools as far as possible to avoid falling to the ground.

9、如有大的漆膜破损,及时报修,以便在油污渗入基础之前进行修补作业。车间用水冲洗地面时,避免油水混合物沉积在深度破损处。

9, if there is a large film damage, timely repair, so that oil seepage before the foundation for repair work. When water is washed on the floor of the workshop, avoid oily water mixture depositing at the depth of damage.


回到顶部